Config = {
    SupplyLineKeys = {
        ConnectHydrant = 20, -- Z
        StartStopFilling = 74,  -- H
    },

    -- if useBone = true, "offsets" field will be ignored; otherwise custom offsets are enabled. 
    VehicleSettings = {
        [`britishladder`] = {
            useBone = false,
            bones = {}, -- to add bones do "bone_name" you can have multiple by doing "bonename", "bonename_2"
            offsets = {
                { x = 0.8710, y = 0.1550, z = 0.0140 },
            },
        },
        [`britishladderels`] = {
            useBone = false,
            bones = {}, -- to add bones do "bone_name" you can have multiple by doing "bonename", "bonename_2"
            offsets = {
                { x = 0.8710, y = 0.1550, z = 0.0140 },
            },
        },
        [`rearmount`] = {
            useBone = false,
            bones = {}, -- to add bones do "bone_name" you can have multiple by doing "bonename", "bonename_2"
            offsets = {
                { x = -1.07, y = 0.9, z = -0.1 },
            },
        },
        [`rearmountels`] = {
            useBone = false,
            bones = {}, -- to add bones do "bone_name" you can have multiple by doing "bonename", "bonename_2"
            offsets = {
                { x = -1.07, y = 0.9, z = -0.1 },
            },
        },
        [`ldfoam`] = {
            useBone = false,
            bones = {}, -- to add bones do "bone_name" you can have multiple by doing "bonename", "bonename_2"
            offsets = {
                { x = 1.03, y = 0.1, z = -0.02 },
                { x = -0.93, y = 0.1, z = -0.52 },
            },
        },
        [`ldfoamels`] = {
            useBone = false,
            bones = {}, -- to add bones do "bone_name" you can have multiple by doing "bonename", "bonename_2"
            offsets = {
                { x = 1.03, y = 0.1, z = -0.02 },
                { x = -0.93, y = 0.1, z = -0.52 },
            },
        },
    },

    EnablePositioningCommand = false,
    -- This enables the /findhosepositioning command to help you find the right vehicle offsets for either
    -- the hose connection or the supply line connection point. See our documentation for more info.

    HydrantOffsets = {
        { model = `prop_fire_hydrant_4`, offsets = {x = 0.0, y = -0.27, z = 0.58} },
        { model = `prop_fire_hydrant_2`, offsets = {x = 0.1, y = 0.0, z = 0.4} },
        { model = `prop_fire_hydrant_1`, offsets = {x = 0.05, y = 0.0, z = 0.6} },
    },

    Translations = {
        stopFilling = "Press Z to disconnect line\nPress H to stop filling",
        startFilling = "Press Z to disconnect line\nPress H to fill tank with water",
        thirdEyeConnect = "Connect line to vehicle",
        thirdEyeDisconnect ="Disconnect line from vehicle",
        thirdEyeStartFill = "Start filling up vehicle",
        thirdEyeStopFill = "Stop filling up vehicle",
        connectLine = "Press Z to connect line to truck",
        waterLevel = "Water Level:",
        noPermission = "You do not have access to use the supply line.",
        placeHydrantCommandHelp = "Place or remove a fire hydrant",
        placeHydrantCommandHelpArgument = "place/remove",
        placeHydrantCommandSuccess = "Hydrant placed successfully!",
        placeHydrantCommandCancel = "Placement cancelled!",
        removeHydrantCommandSuccess = "Hydrant removed!",
        noVehicleNearby = "No vehicle nearby found!",
        cantHoldWater = "This vehicle cannot hold water",
    },

    PlaceHydrantCommand = {
        Enabled = true,
        CommandName = "hydrant",
        PlaceArgument = "place",
        RemoveArgument = "remove",
        Permissions = {
            EnablePermissions = false,
            AcePermissions = {
                Enabled = false,
                -- The permission name will be command.hydrant
            },
        
            ESX = {
                Enabled = false,
                CheckJob = {
                    Enabled = false, -- Enable this to use ESX job check
                    Jobs = {"fireman"} -- A user can have any of the following jobs, allowing you to add multiple
                }
            },
            -- We've added vRP integration. All you need to do is enable it below. Then, configure if you wish to check for groups or permissions, or even both
            vRP = {
                Enabled = false,
                CheckGroup = {
                    Enabled = false, -- Enable this to use vRP group check
                    Groups = {"fireman"}, -- A user can have any of the following groups, meaning you can add different jobs
                },
                CheckPermission = {
                    Enabled = false, -- Enable this to use vRP permission check
                    Permissions = {"fireman.usehose"} -- A user can have any of the following permissions, allowing you to add multiple
                },
            },
            -- We've added QBCore integration. All you need to do is enable it below. Then, configure if you wish to check for jobs or permissions, or even both
            QBCore = {
                Enabled = false,
                CheckJob = {
                    Enabled = false, -- Enable this to use QBCore job check
                    Jobs = {"fireman"}, -- A user can have any of the following jobs, meaning you can add different jobs
                },
                CheckPermission = {
                    Enabled = false, -- Enable this to use QBCore permission check
                    permissions = {"fireman.usehose"}, -- A user can have any of the following permissions, allowing you to add multiple
                },
            },
            -- We've added QBX integration. All you need to do is enable it below. Then, configure if you wish to check for jobs or permissions, or even both
            QBX = {
                Enabled = false,
                CheckJob = {
                    Enabled = false, -- Enable this to use QBX job check
                    Jobs = {"fireman"}, -- A user can have any of the following jobs, meaning you can add different jobs
                }
            },
        },
    },

    Notifications = {
        Enabled = true,
        Framework = {
            QBCore = false, 
            QBX = false,
            ESX = false,
            vRP = false, 
            okok = false,
        }
    },

    InteractType = {
        HydrantInteraction = {
            Drawtext = true,
            ScreenPrompt = false,
            WorldInteraction = false,
    
            ThirdEye = {
                enabled = false,
                qbTarget = false,
                oxTarget = false,
            }
        },
    },

    JobCheck = {
        EnablePermissions = false, -- If set to false, all below job checks will be disabled, even if they are enabled in the config.lua
        AcePermissions = {
            Enabled = false,
            Permission = "usehose"
        },
    
        ESX = {
            Enabled = false,
            CheckJob = {
                Enabled = false, -- Enable this to use ESX job check
                Jobs = {"fireman"} -- A user can have any of the following jobs, allowing you to add multiple
            }
        },
        -- We've added vRP integration. All you need to do is enable it below. Then, configure if you wish to check for groups or permissions, or even both
        vRP = {
            Enabled = false,
            CheckGroup = {
                Enabled = false, -- Enable this to use vRP group check
                Groups = {"fireman"}, -- A user can have any of the following groups, meaning you can add different jobs
            },
            CheckPermission = {
                Enabled = false, -- Enable this to use vRP permission check
                Permissions = {"fireman.usehose"} -- A user can have any of the following permissions, allowing you to add multiple
            },
        },
        -- We've added QBCore integration. All you need to do is enable it below. Then, configure if you wish to check for jobs or permissions, or even both
        QBCore = {
            Enabled = false,
            CheckJob = {
                Enabled = false, -- Enable this to use QBCore job check
                Jobs = {"fireman"}, -- A user can have any of the following jobs, meaning you can add different jobs
            },
            CheckPermission = {
                Enabled = false, -- Enable this to use QBCore permission check
                permissions = {"fireman.usehose"}, -- A user can have any of the following permissions, allowing you to add multiple
            },
        },
        -- We've added QBX integration. All you need to do is enable it below. Then, configure if you wish to check for jobs or permissions, or even both
        QBX = {
            Enabled = false,
            CheckJob = {
                Enabled = false, -- Enable this to use QBX job check
                Jobs = {"fireman"}, -- A user can have any of the following jobs, meaning you can add different jobs
            }
        },
    },
}